Standard Barrel Two Hole Narrow Tongue Lug

All dimensions are in mm, otherwise specified.

As per Customer requirement we can provide without Inspection Window, only 'W' will not be added in below Cat.No.

As per customer requirement we can provide tin finish. 'T' will be added with below Cat No. for tin finish.

UL 486A-486B and CSA C22.2 NO.65-13-Wire Connectors
Conductor CAT No. Stud Size Material ID Ød1 PalmWidth B G StudHole Ød2
#2 AWG 3D STDWNA 2-10B #10 Cu 7.9 10.6 19.0 5.0
3D STDWNA 2-10B 1/4 Cu 7.9 10.6 15.8 6.8
3D STDWNA 2-10B 1/4 Cu 7.9 10.6 19.0 6.8
3D STDWNA 2-10B 1/4 Cu 7.9 10.6 25.4 6.8
#1 AWG 3D STDWNA 2-10B 1/4 Cu 9.1 11.9 19.0 6.8
1/0 AWG 3D STDWNA 2-10B 1/4 Cu 9.9 13.2 25.4 6.8
3D STDWNA 2-10B 5/16 Cu 9.9 13.2 25.4 8.6
2/0 AWG 3D STDWNA 2-10B 1/4 Cu 11.4 14.7 15.8 6.8
3D STDWNA 2-10B 1/4 Cu 11.4 14.7 25.4 6.8
3D STDWNA 2-10B 5/16 Cu 11.4 14.7 15.8 8.6
3D STDWNA 2-10B 5/16 Cu 11.4 14.7 25.4 8.6
350 kcmil 3D STDWNA 2-10B 3/8 Cu 17.7 22.3 25.4 10.4
500 kcmil 3D STDWNA 2-10B 3/8 Cu 21.3 26.9 25.4 10.4
3D STDWNA 2-10B 1/2 Cu 21.3 26.9 25.4 13.4
750 kcmil 3D STDWNA 2-10B 3/8 Cu 26.1 33.0 25.4 10.4